基于SBAS-InSAR技术的金沙江流域沃达村巨型老滑坡形变分析     

冯文凯  顿佳伟  易小宇  张国强 《工程地质学报》2020,28(2):384-393

近年来突发性高位滑塌灾害日益频发,造成恶劣影响。这类地质灾害调查难度高、隐蔽性强,单靠群测群防和地质调查难以解决灾害的防治问题。随着雷达遥感卫星数据质量的不断提升,合成孔径干涉雷达测量(InSAR)中的SBAS-InSAR技术为特大型老滑坡灾前形变探测提供了新的技术途径。利用SBAS-InSAR技术对金沙江流域沃达村滑坡进行地表形变监测,获取了2017年3月30日至2019年9月28日内的形变结果,划定了强烈形变区(Ⅰ雷达)、均匀形变区(Ⅱ雷达),分析了滑坡复活区整体和局部滑塌地表形变速率、累积位移变化趋势和主裂缝形变情况。同时实地进行了工程地质调查和复核,发现老滑坡复活区变形迹象与SBAS-InSAR技术解译成果有着较好的一致性。表明SBAS-InSAR技术在复杂山区地质灾害监测预警领域有较为广阔的应用前景,为类似老滑坡监测预警提供了新的思路与借鉴。  相似文献   

某地下空间承压含水层抽水试验及成果分析     

吴烨  谢世红 《四川地质学报》2020,40(1):107-111

由于地下水突涌风险,地下空间在施工作业中有必要通过抽水试验确定承压含水层的水文地质参数。依据勘察报告的初步评价,基坑开挖15.5m时,场地内第⑦1层承压含水层有可能产生突涌,为确保工程安全施工,需开挖前进行承压含水层抽水试验,取得场地承压含水层水文地质参数及降水引起的沉降特征,为地下空间设计和施工提供可靠依据。本次布设抽水井、观测井、分层沉降标组、孔隙水压力观测孔及地面沉降观测点,依据抽水试验技术要求获取渗透系数、抽水影响半径等相关水文地质参数。最后,针对工程场地内承压水情况及特点进行分析,提出基坑开挖时的承压水降压建议方案。  相似文献   

Thermo-hydro-mechanical modeling of unsaturated soils using isogeometric analysis: Model development and application to strain localization simulation     

Shahriar Shahrokhabadi  Toan Duc Cao  Farshid Vahedifard 《国际地质力学数值与分析法杂志》2020,44(2):261-292

This study presents a thermo-hydro-mechanical (THM) model of unsaturated soils using isogeometric analysis (IGA). The framework employs Bézier extraction to connect IGA to the conventional finite element analysis (FEA), featuring the current study as one of the first attempts to develop an IGA-FEA framework for solving THM problems in unsaturated soils. IGA offers higher levels of interelement continuity making it an attractive method for solving highly nonlinear problems. The governing equations of linear momentum, mass, and energy balance are coupled based on the averaging procedure within the hybrid mixture theory. The Drucker-Prager yield surface is used to limit the modified effective stress where the model follows small strain, quasi-static loading conditions. Temperature dependency of the surface tension is implemented in the soil-water retention curve. Nonuniform rational B-splines (NURBS) basis functions are used in the standard Galerkin method and weak formulations of the balance equations. Displacement, capillary pressure, gas pressure, and temperature are four independent quantities that are approximated by NURBS in spatial discretization. The framework is used to simulate strain localization in an undrained dense sand subjected to plane strain biaxial compression under different temperatures and displacement velocities. Results show that an increase in the displacement rate leads to reduction in the equivalent plastic strain while an increase in the temperature leads to an increase in the equivalent plastic strain. The findings suggest that the proposed IGA-based framework offers a viable alternative for solving THM problems in unsaturated soils.  相似文献   

Crack nucleation in saturated porous media     

Luc Dormieux  Eric Lemarchand  Thomas Carlioz  Laurent Jeannin 《国际地质力学数值与分析法杂志》2020,44(5):553-574

Crack nucleation has been the subject of important contributions in the last two last decades. However, it seems that few attention has been granted to the case of saturated porous media. This is the question addressed in the present paper which is devoted to nucleation in traction mode. From a physical point of view, nucleation is a sudden phenomenon, so that the material response is both adiabatic and undrained. In the spirit of the variational approach, the nucleated crack is viewed as the final state of a region of space in which the material undergoes a full damage process. In traction mode, the opening of a saturated crack in undrained condition induces a drop of fluid pressure. In case of low fluid compressibility, the presence of the fluid delays the brittle failure usually associated with nucleation, as long as the fluid pressure remains above the saturation vapor pressure. Nucleation is therefore possible only if a partial vaporization of the fluid takes place.  相似文献   

新型钢弹簧浮置板道床隔振试验与数值分析研究          下载免费PDF全文

高扬  张强  刘文光  李腾 《世界地震工程》2020,(3):038-47

提出了一种附加位移放大杠杆的新型钢弹簧浮置板道床隔振装置并进行了理论分析，给出了该装置基于位移放大倍数的阻尼力和耗能计算公式。同时设计制作了附加3倍位移放大的新型钢弹簧浮置板道床隔振装置并进行了地铁振动测试，试验结果表明:该装置隔振效果显著。通过建立新型钢弹簧浮置板道床隔振系统有限元分析模型，数值模拟结果与实测振动数据可进行较好的吻合，结果表明:新型钢弹簧浮置板道床隔振系统能有效地减小结构的动力响应。  相似文献   

高分异花岗岩浆可能是华南花岗岩型铀矿床主要铀源——来自诸广山南体花岗岩锆石铀含量的证据     

伍皓  夏彧  周恳恳  张建军 《岩石学报》2020,36(2):589-600

锆石的U-Pb测年、Hf和O同位素及稀土、微量元素的研究与应用已获得诸多进展,但锆石中铀含量所蕴藏的地质意义却较少被关注。华南花岗岩型铀矿床的铀源一直存在争议,不同观点认为其分别来自早期已固结地质体、分异岩浆、地幔柱或热点以及U、Th、K富集圈。为尝试利用锆石中的铀含量来追索铀源,本文通过搜集诸广山南体花岗岩锆石U-Pb同位素测年文献,掌握了该花岗岩中14个岩体、37件样品、3种岩性,共467个锆石定年数据。通过数据分析发现印支期(253Ma、244Ma)和燕山期(139Ma、124Ma)具高分异特征的4件酸性岩脉(小岩体)样品中锆石的铀含量明显高于同期岩体。依据铀矿床中高分异酸性岩脉(小岩体)侵位期、基性岩脉侵位期、铀成矿早期(140~90Ma)三者的良好对应关系,结合这一锆石铀含量指示,初步认为华南花岗岩型铀矿床中铀可能主要来自高分异花岗岩浆;推测花岗岩型铀成矿可能属壳幔混合作用结果,即铀源来自地壳分异岩浆,成矿流体和矿化剂主要来自地幔,而成矿空间受断裂系统控制。岩体锆石铀含量或可在铀源丰度、矿床品位判别等方面发挥积极作用。  相似文献   

三疣梭子蟹几丁质酶基因(PtCht6)的克隆及其在免疫中的功能分析     

宋柳  吕建建  王磊  孙东方  刘萍 《海洋与湖沼》2019,50(5):1080-1090

几丁质酶(chitinase)在甲壳动物的蜕皮、消化和免疫等很多生物学过程中发挥重要功能,为深入探讨几丁质酶的免疫防御机制,本实验利用RACE技术克隆了三疣梭子蟹(Portunus trituberculatus)PtCht6基因。该基因cDNA全长2736bp,开放阅读框(ORF)2103bp,编码700个氨基酸,具有几丁质酶GH18家族典型特征。利用实时荧光定量技术分析PtCht6在三疣梭子蟹不同组织、不同蜕皮阶段、不同病原感染以及低盐胁迫(11)下的表达特征,结果显示:PtCht6在各组织中均有表达且在肝胰腺中的表达量最高;在不同蜕皮时期的肝胰腺中,其表达量由蜕皮后期(A/B)、蜕皮间期(C)、蜕皮前期(D)依次递减(P0.05);人工感染WSSV和副溶血弧菌后.PtCht6的表达量在肝胰腺中分别于12h、72h达到最大值,在血细胞中均于12h达到最大值,且相较于对照组,整体显著上调表达(P0.05);低盐胁迫能够显著抑制该基因的表达,最高抑制73倍(P0.05)。同时发现,低盐环境下感染WSSV后,该基因达到峰值的时间明显延迟(至少延迟12h.P0.05)。该研究结果预示PtCht6作为免疫因子参与三疣梭子蟹的病原防御,且低盐胁迫在一定程度上抑制了该基因的免疫功能。  相似文献   

Closed-loop randomized kinodynamic path planning for an autonomous underwater vehicle     

《Applied Ocean Research》2019

A randomized kinodynamic path planning algorithm based on the incremental sampling-based method is proposed here as the state-of-the-art in this field applicable in an autonomous underwater vehicle. Designing a feasible path for this vehicle from an initial position and velocity to a target position and velocity in three-dimensional spaces by considering the kinematic constraints such as obstacles avoidance and dynamic constraints such as hard bounds and non-holonomic characteristic of AUV are the main motivation of this research. For this purpose, a closed-loop rapidly-exploring random tree (CL-RRT) algorithm is presented. This CL-RRT consists of three tightly coupled components: a RRT algorithm, three fuzzy proportional-derivative controllers for heading and diving control and a six degree-of-freedom nonlinear AUV model. The branches of CL-RRT are expanded in the configuration space by considering the kinodynamic constraints of AUV. The feasibility of each branch and random offspring vertex in the CL-RRT is checked against the mentioned constraints of AUV. Next, if the planned branch is feasible by the AUV, then the control signals and related vertex are recorded through the path planner to design the final path. This proposed algorithm is implemented on a single board computer (SBC) through the xPC Target and then four test-cases are designed in 3D space. The results of the processor-in-the-loop tests are compared by the conventional RRT and indicate that the proposed CL-RRT not only in a rapid manner plans an initial path, but also the planned path is feasible by the AUV.  相似文献   

海洋微塑料检测技术研究进展   总被引：1，自引：0，他引：1  

王俊豪  梁荣宁  秦伟 《海洋通报》2019,38(6):601-612

海洋微塑料污染目前已成为全球性的环境问题,近年来海洋微塑料检测技术越来越受到人们的关注。本文简要总结了微塑料样品采集及处理方法,并从检测方法的角度系统综述了近些年来微塑料检测技术的研究进展,涉及目视分析法、光谱法(如傅立叶变换红外光谱法和拉曼光谱法)、热分析法以及其他分析方法等(如质谱法以及扫描电子显微镜-能谱仪联用法)。本文简要评价了各类检测方法的优缺点,以期为海洋微塑料检测技术的发展提供参考,并探讨了未来海洋微塑料检测技术的发展方向。  相似文献   

Research on the Method of De-noising the Short-wave Time Signal at Low SNR     

《Chinese Astronomy and Astrophysics》2019,43(4):579-589

A voice enhancement algorithm based on the Empirical Mode Decomposition (EMD) and the improved spectral subtraction is proposed for the low-SNR (Signal Noise Ratio) shortwave time signal. This method is proposed to solve the problem that the shortwave time signal cannot be used for timing in complex noisy environments. The core idea of this method is to use the Hilbert-Huang Transform (HHT) algorithm to make the empirical mode decomposition on the noisy shortwave signal, and to select the intrinsic mode functions containing the shortwave signal information for the signal reconstruction by through the maximum correlation. Then, to make the spectral subtraction on the reconstructed signal to achieve the purpose of noise reduction. The experimental result shows that this method has a better noise reduction than the traditional methods.  相似文献